Here are the pics of my RBC kits F-22 Raptor build in process. The specs are as follows twin Wemotec 70mm fans with Mega 16-15-3 motors and 55 amp esc's one 4 cell 3300 mah pack which will give her more than 1-1 thrust to weight ratio. Airframe is 43 inches long with a 33 1/2 inch wingspan. Controll system is a simple ailivators set up which is the same as a delta wing set up but uses the elevators instead of the ailirons for control two Hitec HS85MG servos and a 6200 Spectrum reciever Castle 10amp BEC. The jet will be bungee launched off a pvc pipe ramp and will belly land.BCNU Walter